Ball Bearings: Stainless Steel

SS6800 SERIES
Extra Light Stainless Steel Ball Bearings

The deep thin-walled ball bearings of SS6800 series will bear moderate axial load as well as radial load. The SS6800 has a lower coeficiancy of friction and higher speed rating compared to other ball bearing types of the same size. When the use of a thrust type ball bearing is not suitable due to high speeds the SS6800 series can be used to bear pure axial loads. The SS6800 series is available in open, sealed or shielded configurations.

6800 SERIES BALL BEARINGS - EXTRA LIGHT
NPB
Part No.
Bore
(mm)
O.D.
(mm)
Width
(mm)
Load Rating(KN) Apx. Weight
(kg)
Cor Cr
SS 6800 10 19 5 0.93 1.80 0.005
SS 6801 12 21 5 1.00 1.90 0.0055
SS 6802 15 24 5 1.30 2.10 0.006
SS 6803 17 26 5 1.50 2.20 0.007
SS 6804 20 32 7 2.20 3.50 0.015
SS 6805 25 37 7 2.90 4.30 0.017
SS 6806 30 42 7 3.60 4.70 0.019
SS 6807 35 47 7 4.00 4.90 0.023
SS 6808 40 52 7 4.40 5.10 0.026
SS 6809 45 58 7 5.60 6.40 0.03
SS 6810 50 65 7 6.10 6.60 0.043
Material: Ring & Ball are 440C / cage and shield material are 300 series.