metric seriesAll dimensions are metric.
LOAD SERIES
Heavy Duty Metric
Unsealed & Sealed
|
|
| LOAD SERIES HEAVY DUTY METRIC UNSEALED & SEALED | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Ball Bore Diam. B |
Part No RFQ per item |
Outside Diam (1) D |
Ball Width W |
Race Width T |
Ball Diam BD |
Tilt Angle (2)  |
Shldr Diam O |
Shaft Fillet C1 |
Hsng Fillet C2 |
Radial Loads (3) |
||||||
| Nom MM |
Tol | With Seals |
W/O Seals add: |
Nom | Tol | Nom | Tol | Nom | Tol | Ref | Deg | Ref | Max | Max | Static | Dyn |
| 20 | -.010 | GEG20ES | -2RS | 42 | -.011 | 25 | -.120 | 16 | -.240 | 35.5 | 17 | 22.7 | .3 | .6 | 54,001 | 10,805 |
| 25 | -.010 | GEG25ES | -2RS | 47 | -.011 | 28 | -.120 | 18 | -.240 | 40.7 | 17 | 28.6 | .6 | .6 | 69,752 | 13,954 |
| 30 | -.010 | GEG30ES | -2RS | 55 | -.013 | 32 | -.120 | 20 | -.300 | 47 | 17 | 33.7 | .6 | 1.0 | 90,004 | 18,008 |
| 35 | -.012 | GEG35ES | -2RS | 62 | -.013 | 35 | -.120 | 22 | -.300 | 53 | 16 | 38.8 | .6 | 1.0 | 112,507 | 22,504 |
| 40 | -.012 | GEG40ES | -2RS | 68 | -.013 | 40 | -.120 | 25 | -.300 | 60 | 17 | 44.1 | .6 | 1.0 | 144,009 | 28,576 |
| 45 | -.012 | GEG45ES | -2RS | 75 | -.013 | 43 | -.120 | 28 | -.300 | 66 | 15 | 49.8 | .6 | 1.0 | 175,506 | 35,108 |
| 50 | -.012 | GEG50ES | -2RS | 90 | -.015 | 56 | -.120 | 36 | -.400 | 80 | 17 | 55.8 | .6 | 1.0 | 274,508 | 55,129 |
| 60 | -.015 | GEG60ES | -2RS | 105 | -.015 | 63 | -.150 | 40 | -.400 | 92 | 17 | 67.1 | 1.0 | 1.0 | 351,007 | 70,874 |
| 70 | -.015 | GEG70ES | -2RS | 120 | -.015 | 70 | -.150 | 45 | -.400 | 105 | 16 | 77.5 | 1.0 | 1.0 | 450,005 | 90,008 |
| 80 | -.015 | GEG80ES | -2RS | 130 | -.018 | 75 | -.150 | 50 | -.500 | 115 | 14 | 87.8 | 1.0 | 1.0 | 551,253 | 110,254 |
| 90 | -.020 | GEG90ES | -2RS | 150 | -.018 | 85 | -.200 | 55 | -.500 | 130 | 15 | 98.2 | 1.0 | 1.0 | 686,254 | 137,259 |
| 100 | -.020 | GEG100ES | -2RS | 160 | -.025 | 85 | -.200 | 55 | -.500 | 140 | 14 | 108.1 | 1.0 | 1.0 | 731,254 | 147,372 |
| 110 | -.020 | GEG110ES | -2RS | 180 | -.025 | 100 | -.200 | 70 | -.500 | 160 | 12 | 119.5 | 1.0 | 1.0 | 1,068,752 | 213,754 |
| 120 | -.020 | GEG120ES | -2RS | 210 | -.030 | 115 | -.200 | 70 | -.600 | 180 | 16 | 130.0 | 1.0 | 1.0 | 1,215,006 | 243,008 |
| Nom MM |
Tol | With Seals |
W/O Seals add |
Nom | Tol | Nom | Tol | Nom | Tol | Ref | Deg | Ref | Max | Max | Static | Dyn |
| Ball Bore Diam. B |
Part No RFQ per item |
Outside Diam (1) D |
Ball Width W |
Race Width T |
Ball Diam BD |
Tilt Angle (2) |
Shldr Diam O |
Shaft Fillet C1 |
Hsng Fillet C2 |
Radial Loads (3) |
||||||
- (1) All tolerances in this catalog are before the outer races are fractured and before application of dry film lubricant
- (2) Seals may reduce tilt angle
- (3) Ultimate loads for the bearings in this catalog are approximately 1.5 times the catalog load ratings
• For numeric bore size conversion between manufacturers see numerical interchange table.
.
|
NATIONAL PRECISION BEARING GROUP
of Mechatronics, Inc.
Phone: 800-426-8038 • 425-222-5900 • Fax: 888-448-1153 • 425-222-5950
How to Place an Order Copyright © 2010, National Precision Bearing, Inc. |
|
 |